Version 1.5.0 - May 2014

1. New Main Body Anodized Rails (better moment of inertia)

2. New Linear Guideways (no play adjustment needed)

3. New Ball support plates on Linear Guideways (lighter)

4. New Magnets in Ball ends (diameter 6.0mm now was 4.0mm before, 1.5 to 2 times stronger)

5. New ends and magnets support (better guidance)

6. New cables channels

7. Documentation rewritten

8. Minor improvements

 

Version 1.4.0 - March 2014

1. New Megatronics V3.0 Board

2. New wiring and connectors according to the Megatronics V3.0

3. Option for Part Heater

4. New Bed Insulation for Part Heater

5. Modifications in the documentation

 

Version 1.3.0 - January 2014

1. New Middle plate

2. New Semi Automatic bed leveling

3. Modification in documentation

 

Version 1.2.4 – November 2013

1. New 30A Power supply

2. New PEI Bed Option

3. Modification in documentation

 

Version 1.2.3 - October 2013

1. Increased size of Extruder hole to Dia 2.50mm (material was difficult to take off)

2. Added option for Central Fan

3. New more fexible wrap for Extruder/Hot end hose (previous was spiral Wrap)

 

Version 1.2.0 - September 2013

1. Magnetic Rod End.

2. 3 Spheres System on head.

3. Support with sphere on carriages.

4. Extruder top plate and Fan support on Hotend.

5. Upgraded Documentation.

6. Several minor modifications and checks added.

4. Modification in documentation

 

Version 1.1.0 - July 2013

1. New aluminium rod end on carbon arms and new glue.

2. Added a flat on the stepper motors axis

3. New Pololu Drivers, easier to configure

4. Completely new Adjustable Carriages with lighter Igus component

5. Added nuts on tension belt bearing Axis

6. Modification of the belt tension Tool to work with a standard 1.5 liter water bottle

7. Several modifications in the documentation

8. Several minor modifications and checks added

 

Version 1.0.0 - May2013

1. First release