To prevent damage to your SpiderBot product or injury to yourself or to others, read the following safety precaution in their entirety before building and using this equipment. Keep this safety instructions where all those who use the product will read them.

 

WARNING : Always connect the 3D printer to a 110-240V line which is protected by a 30mA differential circuit-breaker conforms to legislation on protection of personnel.

ATTENTION : Toujours alimenter l'imprimante avec une prise protegée par un disjoncteur différentiel 30mA conforme à légistation sur la protection des personnes.

 

Always unplug the power cable on any intervention.

Switch off the printer and unplug the power cable. Continued operation could result in injury.

 

Turn off immediately in the event of malfunction

Should you notice smoke or an unusual smell coming from the equipment or AC adapter unplug the power cable. taking care to avoid burns. Continued operation could result in injury.

 

Do not use in the presence of flammable gas

Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire.

 

Keep out of reach of children

Failure to observe this precaution could result in injury.

 

Observe proper precautions when handling the Printer

• Keep dry. Failure to observe this precaution could result in fire or electric shock.

• Dust on or near the metal parts of the printer should be removed with a dry cloth.

Continued use could result in fire.

 

Do not handle the power cable during thunderstorms.

Failure to observe this precaution could result in electric shock.

 

Use appropriate cables

When connecting cables to the input and output jacks, use only the cables provided for the purpose to maintain compliance with product regulations.